No Products in the Cart
A horseback riding helmet with safety and style in mind, the Trauma Void EQ3 Microfiber helmet has been designed with MIPS Brain Protection System and comes with a microfiber outer shell.
Trauma Void's EQ3 helmet is the wave of the future and the next step in brain protection technology for the equine industry. The most important component of the EQ3 helmet design is the incorporated Multi-Directional Impact Protection System (MIPS), which has been used in bike, motor, and snow helmets for years. To learn more about MIPS technology, visit: http://traumavoid.com/Technology.html.
Safety may be the main priority of Trauma Void's EQ3 helmet, but it has also been designed for comfort, style, and affordability. The design features a removable and washable Coolmax lining inside with great ventilation, and it is being offered in black, blue, and brown.
The Smooth Helmet comes equipped with:
MIPS technology inside
Removable and washable Coolmax lining
Round and Long-Oval shaped helmet liners included with every purchase
Comfortable design with great ventilation
Outer shell made with micro-suede
Screen and chinstraps made of durable PU leather
Measure: See below for further instructions on measuring for a specific model of a Trauma Void helmet.
Fitting:Place the helmet level on the rider. If the helmet contains a dial, adjust the dial to fit the rider securely. Without harnessing the chinstrap, have the rider shake their head from side-to-side and again from front-to-back, check for movement and ask the rider if there is an even pressure or if there is any pinching or air pockets. If the helmet does not have a dial-fit system and there is movement from side to side but not front to back, try our oval liner, which is thicker on the sides than front to back. If there is movement overall or front to back, try going down a size. Once you've found a secure fit, move the brim of the helmet up and down, the rider's eyebrows should wiggle.
Adjust the Chinstrap:The length of your chinstrap should rest just under your chin and touch the bottom of your ear lobe. You should be able to fit one finger in the space between strap and your chin. The strap should be secure, but still allow you to move your head up and down comfortably.
Sizing Your EQ3 Helmet
Helmet Fitting/Measuring:To measure for the best fit, find the circumference of the head. To begin, use a flexible tape measure and place it 1-1/2 cm above the eyebrows, skimming the tops of the ears, take it around the back of the head to the fullest part. To find your size, round up to the nearest centimeter and go up one size from that measurement. Please note that the rider's hair should be as worn when using the helmet.
|EQ3 Sizing Chart|
|Size||6 1/2||6 5/8||6 3/4||6 7/8||7||7 1/8||7 1/4||7 3/8||7 1/2|
**Helmet Notice, Disclaimer & Warning All equestrian sports are inherently dangerous and involve the risk of serious injury or death. Riders using these products ride at their own risk with full knowledge of the hazards and risks associated with their activities. Helmets are designed for equestrian use only. Helmets cannot offer complete protection from injury or death to riders in case of fall, collision, impact, loss of control or otherwise. Helmets cannot protect areas of the head that are not covered. Helmets offer no protection against injuries involving forces other than impact.
CAUTION: Helmets must fit well and all retention straps must be securely fastened. Helmets are constructed so that the energy of an impact may be absorbed through partial destruction of the helmet. Helmets that suffer an impact should be destroyed and replaced. The protective qualities of helmets may be compromised by prior impact, age, use and many common substances. Always follow the manufacturer‰ۡó»s recommendations before applying cleaning agents, paints, or adhesives.
Equine Exchange disclaims any responsibility for injuries or death incurred while wearing any of the helmets offered for sale.Representations regarding testing results, equipment ratings, product specifications, ASTM and/or SEI standards, and the adequacy of all such standards and designations are made solely by the product‰ۡó»s manufacturer. Equine Exchange does not warrant or confirm the representations of the manufacturers. Equine Exchange makes no representations expressed or implied regarding the fitness of these products for any particular purpose nor the extent to which the products protect riders from injury or death. By purchasing any of the helmets offered for sale and using it in an equestrian sport, the purchaser AGREES FREELY AND VOLUNTARILY TO ASSUME ALL RISKS RELATED TO EQUESTRIAN SPORTS, including the risk of personal injury, damage, death or property damage. Further, to the maximum extent permitted by law, the purchaser does release Equine Exchange from any and all responsibility or legal liability related to purchaser‰ۡó»s participation in equestrian activities.